Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It is discreet It does not include LED indicators or key fobs, and is hidden in the wiring of your vehicle.
The user can also disable the system temporarily using Transport Mode when renting their vehicle. This guide will walk you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning attacks and relay attacks. The system is directly connected to the ECU of your vehicle and secured by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by cutting circuits.
The system is easy to use, but it's important to have an expert installation to ensure a secure and secure connection with your vehicle's ECU. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest an alarm or tracking system to complete the security package for your vehicle.
First, the installer must disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After that the installer is now able to begin work. Basic hand tools are useful to make precise connections and a multimeter can be used to check the electrical properties and safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The Ghost Immobiliser user's manual will give specific instructions that are specific to your particular model.
It is crucial to select a grounding location that is free of dirt or paint during installation. The installer should also make sure the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on your vehicle's ECU. These wires can be plugged into or soldered, depending on the model. To ensure a stable and durable connection it is recommended you choose a high-quality plug.
Transport Mode can be activated by the customer after the installation is complete. This allows mechanics or valet parking to use the vehicle without knowing the pin code. The user must press the service icon on the dashboard five times within two seconds. The system will confirm this by showing five indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's a great option for those who rent their vehicles often through platforms like Turo. Immobilisers can also lower insurance costs since it significantly decreases the risk of theft.
Getting Started
You can't go far wrong with an autowatch immobiliser for those who want to safeguard your car from thieves. It prevents your car from starting if someone steals or copies your key. This is due to its advanced technology, which is designed to stop the car's engine from starting without the correct PIN code is entered.
The device connects to the CAN bus network in your vehicle and allowing it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering wheel to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the ultimate system to protect your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing a ghost immobiliser can be an easy procedure, but it's important to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you need to locate and determine a constant 12V power source as well as a good grounding point on the vehicle's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques for an effective connection. Also, make sure to insulate the connections with heat shrink tubing and insulation tape to protect them from short circuits in electrical power and other problems.
After the wires have been connected, you can reconnect the battery and start the engine to test the immobiliser's function. When everything is functioning correctly then you can put it in a safe location under the dash or somewhere else in the vehicle. Be sure to cover it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it complies with the highest standards of security and is a fantastic protection against car thieves. It is invulnerable to hacking and key cloning and is not able to be disabled without the code. The device is also simple to use and is able to be put into the service valet mode to ensure that your car will not be activated when you bring it in for servicing or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to its CAN bus. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems that require the removal of circuit elements.
The system is also undetectable by thieves using diagnostic scanning tools. This is due to the fact that it does not transmit and receive radio frequency signals, and it uses the CAN data format to communicate with your ECU. It doesn't require any modifications to your current key fobs.
Enter the sequence to disarm (either two or one button) and then turn on the ignition in your car to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. You are now able to start your vehicle and drive in a safe manner.
Once installed, the Ghost Immobiliser protects your car against key cloning or hacking while protecting its value. If you ever need to surrender your car for service or valet parking, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to locate an energy source that is constant (12V) and an earthing point. Be sure that both are properly insulated and can be touched. It's also recommended to use cable ties to bundle and secure the wires. This reduces the risk of tampering by potential thieves. Make sure you verify the position of these points to avoid committing a mistake and mark them with a piece of tape or label. Examine all connections for signs that they're wearing out. Make sure that all connections are securely in place, and are properly insulated. Make sure to test your Ghost Immobiliser after installation has been completed. This will make sure that the unit is operating properly, and that all connections are safe and well-insulated. Be sure to correct any issues immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your vehicle's ECU to block unauthorized engine start. Its innovative technology safeguards your vehicle from key cloning and hacking as well as other methods commonly used by thieves to steal cars. The Ghost also works in tandem with existing alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unparalleled features and secluded design make it a popular choice for car lovers and security-conscious drivers too.
It is essential to follow the steps of installation to ensure a proper integration of Ghost Immobiliser. A good starting point is to consult the wiring diagram for your vehicle that will serve as a guideline for locating and connecting the necessary wires. After that, you'll need identify the power source and grounding points. Once you've located them, you'll be required to mark the points to make them easy to locate when installing. It's essential to use high-quality materials and tools. Hand tools are essential to assist you in making precise connections. A multimeter can verify electrical values and guarantee security. Cable ties and insulation tape will help keep all connections tidy and neat. Also, a user's guide will provide specific instructions specifically tailored to your Ghost model.
It is crucial to test the system before installing it. Enter have a peek at these guys into the system, and then start the vehicle. This will ensure that the immobiliser is working in the way it was intended, preventing unauthorized vehicle start-ups. This step should be performed frequently as part of your regular inspections of your vehicle to ensure the system is always working correctly.
After the installation has been completed, you can start driving your car with confidence. The Ghost will help keep your pride and joy safe from would-be thieves, ensuring that nobody can escape with your car without the proper PIN code. The Ghost can also be used with a Thatcham-approved tracker to detect any attempts to tamper with or steal your vehicle, allowing you to locate your vehicle if it's stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with most major manufacturers. If you are interested in protecting your car with this cutting-edge device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This reassures customers, insurers and law enforcement officials that all installations are completed safely and in a correct manner.